Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | AHS |
Model Number : | PSP006 |
Certification : | ISO9001 |
Price : | ¥15-80/piece |
Payment Terms : | T/T |
Supply Ability : | 15000Piece |
Delivery Time : | 5-8 work days |
Plastic Structured Packing Classification
Structured packing is formed from corrugated sheets of perforated embossed metal, plastic (including PTFE), or wire mesh. Where Plastic Structured Packing material's heat resistance reaches 100°C for PP and 150°C for PVDF. The packing sheet may be perforated with small holes to increase mass transfer efficiency. If the separation requirement is not high, it needs no perforation to increase sheet stiffness.
Plastic Structured Packing Application
Plastic structured packing can increase production and efficiency,
and reduce energy consumption. Suitable for large volume towers and
easy foaming systems. Widely used in absorption and analysis
processes, low-temperature absorption, water washing, and dust
removal device are most widely used in gas purification, gas
solution preparation, waste gas exchange, and heat exchange
process, and their maximum temperature resistance is 150 ℃. Plastic
structured packing has strong resistance to hydrochloric acid and
alkali, and can completely replace industrial ceramic corrugated
packing, which is a creative revolution in the packing industry.
Defects of industrial ceramic corrugated packing: large
accumulation ratio, difficult filling, small specific surface area,
easy breakage, short service life, etc.
It is widely used in the operation of absorption and decomposition
absorption devices, especially in the production process with heavy
liquid load and high operating pressure, such as (HCl) and (H2SO4)
production, degassing CO2 and H2S from natural gas, drying
chlorine, liquid production, waste gas purification, and
decomposition absorption deoxygenation devices.
Plastic Structured Packing Specification
The corrugated plate is installed vertically and parallel to the longitudinal axis of the container. The direction of the corrugations on the plate is at an angle of 30°-60° with the length of the plate. The corrugations on the same corrugated plate are parallel to each other; the corrugations of two adjacent plates are crossed. When the fluid flows in this part, it moves upward and downward, which is helpful for the coalescence, buoyancy, or settling of the dispersed phase droplets, which greatly improves the processing capacity and separation efficiency. Coupled with the orderly arrangement of the packing, the solid phase particles contained in the material can be discharged through the corrugated bottom of the packing, so the anti-blocking performance is good and the operation flexibility is large.
Plastic structured packing has the advantages of thin wall,
lightweight, large void, corrosion resistance, lightweight, large
flux, long life, pressure drop, easy filling, easy replacement,
high specific surface area, low bulk density, strong hydrochloric
acid, and alkali resistance, With the characteristics of large
operating flexibility and insignificant amplification effect, it
can be applied to corrosive substances such as strong acid.
Structured packaging has two slants, "X" and "Y". The "Y" type packing, with an inclination of approximately 45º to the horizontal axis, is the most widely used packing. They offer higher filtration efficiency than the "X" type but at the cost of higher pressure drop/lower capacity. The "X" type packing has an inclination of 60° to the horizontal axis and is suitable for high volume and low-pressure drop applications.
Performace/Material | PE | PP | RPP | PVC | CPVC | PVDF |
Density(g/cm3)after injection molding | 0.98 | 0.96 | 1.2 | 1.7 | 1.8 | 1.9 |
Operation TEMP.(℃) | 90 | >100 | >120 | >60 | >90 | >150 |
Chemical Corrosion Resistance | GOOD | GOOD | GOOD | GOOD | GOOD | GOOD |
Compression Strength(Mpa) | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 |
Packing type | Theoretical Plate Number(piece/m) | Surface area (m²/m³) | Void Volume (m³) | Bulk Density (kg/m³) | Liquid Loading(m³/m²·h |
125Y | 1-2 | 125 | 0.985 | 37.5 | 0.2-100 |
250Y | 2-2.5 | 250 | 0.97 | 75 | 0.2-100 |
350Y | 3.5-4 | 350 | 0.95 | 105 | 0.2-100 |
500Y | 4-4.5 | 500 | 0.93 | 150 | 0.2-100 |
125X | 0.8-1.9 | 125 | 0.985 | 37.5 | 0.2-100 |
250X | 1.5-2 | 250 | 0.97 | 75 | 0.2-100 |
350X | 2.3-2.8 | 350 | 0.958 | 105 | 0.2-100 |
500X | 2.8-3.2 | 500 | 0.93 | 150 | 0.2-100 |
Anping County Hardware Mesh Products Co., Ltd. is located in Anping
County, Hebei Province, known as the "Hometown of Chinese Wire
Mesh". The company is a dedicated manufacturer of wire mesh
demisters. The company has more than 90 sets of knitted mesh
equipment. The wire mesh demister is the main product of our
company. Most of our employees are operation, maintenance, and
installation personnel with practical experience, who can provide
customers with the required engineering consultation and
installation of tank filtration. solution.Nearly 20 years of
experience in the production of mist eliminator mats, knitted wire
mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system
in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are
qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard
and popular sizes, we can also customize specific applications
according to customer needs.
During the company's development, through continuous on-the-spot
inspections, personal exchanges and cooperation with customers, and
comprehensive discounts and technical support, we have won strong
customer support and praise.
The company's performance has maintained an annual output value
growth rate of 30-40. Our employees pursue the policy of
"enterprising, truth-seeking, rigorous and united", continue to
develop and innovate, take technology as the core, and
wholeheartedly provide you with cost-effective products,
high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to
cooperating with you!
Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB
or CIF, packaging term, etc.
Q: Is the size fixed?
A: No, except for table size. Can be customized according to
demand!
Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type
of products you need.
Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific
quantity and type.
![]() |